EcoLEDLighting :: Emergency Handrail, Balustrade & Stairway Lighting

Emergency Handrail, Balustrade & Stairway Lighting

European laws changed in 2005 with regards to the disabled and partially-sighted to provide easier accessibility to both private and public buildings, built or re-developed January 1st, 2005.

The EcoLEDLighting Emergency Lighting solution was designed to comply with The Regulatory Reform (Fire Safety) Order 2005.

Self-contained mains-powered with battery backup lighting, enclosed within the balustrade / handrail assembly
In emergency mode, the system provides up to 2 hours (optional 4 hours) of 30-50% dimmed illumination to current H & S standards
Provides ambient illumination at all times and dims into low-light condition in an emergency situation (mains power off)

Specifically designed to guide light onto the stairs & floors of emergency exits & corridors and areas where a hazardous or explosive environment exists and durability is essential. They are also designed for all interior and exterior walkways where handrails are used.

Available to mount a range of handrails between ø38mm and ø76mm railings. All EcoLEDLighting products are 100% recyclable.

Specifications

Light Source	Multiple White High Flux Cree™ XR-E LEDs 1 x Red LED
Housing	Pressure die cast thermally conductive EcoLEDLighting specified AL/Alloy material. Anti-corrosive treated
Housing Colour	Natural finish, or as required with various powder coat and plated surface treatments available.
Optic	High transmission, fire resistant, impact resistant, ballistic quality polycarbonate material. The optical arrangement at the front of the LED creates an elliptical panel of light which produces a 5:1 beam 90cm wide at floor level.
Mounting - Handrail	Typically mounted underneath the standard rose fixture at mandated 90cm intervals.
Mounting - Balustrade	Typically mounted underneath, centrally spaced between the 90cm balustrade pillars.

Electrical Specifications

Supply Voltage (External)	90/265V AC (Universal Power Supply)
Supply Voltage (Internal)	24V DC
Power Consumption	12.0W (max)
Power Dissipation	12.0W (max)
Current Draw (Internal)	350 mA (max)

Electrical Specifications (Power Supply Unit)

Emergency electrical backup power supply is installed within the tubular structure of the balustrade/handrail. Battery pack is pre-charged with a single mains cable leads to the power supply. All electronic controls/wiring looms/lights, etc. are internally fitted.

Environmental Specifications

Operating Temperature -30°C (min) to +65°C (max)
BS, CE, DDA, WEEE, RoHS, SELV requirements for low voltage lighting and normal operation

Rating

Up to IP68

Rated Life of Units

Under normal operating conditions these units are designed to have a maintenance-free life in excess of 50,000 hours.

Order Information

PRODUCT CODES
Handrail Lights
HR-1
Balustrade Lights
BAL-1

Handrails/Balustrade Emergency Lighting is manufactured and sold in the UK by the Glentworth Group

PCT Patent Number: GB0510079.7

Typical Applications

Specifically designed to guide light onto the stairs & floors of emergency exits & corridors and areas where a hazardous or explosive environment exists and durability is essential
Industrial and Public walkways
Bridges
Tunnels
Mines
Underground rail systems

Downloads

Handrail/Stairway Lighting Datasheet

Solutions by Industry

Solutions by Lighting Type

As seen on

Click to view video

Try our EcoLEDLighting LED
Energy Savings & Carbon Trust
Loan Calculator

Member of the Lighting Industry Federation

All our products are Lead Free