EcoLEDLighting :: EcoLEDLighting LED Lift/Elevator Lighting

EcoLEDLighting LED Lift/Elevator Lighting

The EcoLEDLighting LED Lift/Elevator Lights are designed as replacements for dichroic and halogen light units.

EcoLEDLighting offer a similar light output / footprint to the existing technology but consume 70+% less energy as well as dramatically reducing the radiated heat (typically 80% cooler) normally associated with conventional lift lights.

All EcoLEDLighting luminaires are 100% recyclable.

Specifications

Light Source	3 x White High Flux LEDs 1 x Red LED (Emergency Light)
Heatsink Body	Pressure die cast thermally conductive EcoLEDLighting specified AL/Alloy material. Anti-corrosive treated
Heatsink Colour	Silver/Grey
Bezel	Pressure die cast AL/Alloy material. Anti-corrosive treated and finished on the visible surfaces in powder coat paint. Colour: Matt White or Polished Chrome. Options on colour, finish and design are available - see our Bezel Finishes page
Optic	High light transmission fire and impact resistant polycarbonate material.
Mounting	Mouse trap type spring retention through ø55.0(+)mm hole allowing for mounting into panels from 1.6mm up to 20mm thickness

Electrical Specifications

	4-Way PSU	8-Way PSU
Input Rating 110V AC 50/60Hz 240V AC 50/60Hz Anti-Surge Fuse Rating	1.2A 0.6A 6.3A	2.4A 1.2A 6.3A
Output Rating 12V DC	4.0A	8.0A
Weight	800 grams	1,300 grams

4-Way PSU
Order Code: ECOLED-PSU4

4-Way lighting system driving ECOLED-9L downlighters and optionally 1 Emergency lamp (ECOLED-9L/EC - requires 1 off 12V Emergency Backup Battery ECOLED-ECBATT).

8-Way PSU
Order Code: ECOLED-PSU8

8-Way lighting system driving ECOLED-9L downlighters and optionally 2 Emergency lamps (ECOLED-9L/EC - requires 2 off 12V Emergency Backup Battery ECOLED-ECBATT).

Electrical Specifications - Power Supply Unit

Fully integrated electronic PSU as a separate inline unit as part of the input cable. 4-way (for 2 or 4 lights) or 8-way (for 6 or 8 lights) PSUs available.

Electrical Specifications - Battery Backup
Order Code: ECOLED-ECBATT

Voltage	12V - 700MAh
Emergency Light	Output 20-30% for 4+ hours

Environmental Specifications

Cooling	Convection cooled
Operating Temperature	-30°C (min) to +65°C (max)
Compliances	BS, CE, WEEE, SELV requirements for low voltage lighting and normal operation

Rating

Standard: IP41 - What's this?

Rated Life of Units

Under normal operating conditions these units are designed to have a maintenance-free life in excess of 100,000 hours.

Warranty

Details of the 6 year return to works warranty are available here.

Order Information

PRODUCT CODE
ECOLED-9L - Standard
ECOLED-9L/EC - Emergency

BEAM VARIANTS
Narrow Beam
Medium Beam - Standard
Wide Beam

POWER SUPPLY UNIT VARIANTS
ECOLED-PSU8
PSU - 8 Way (for 6 or 8 lights)
110-240 Volts In - 12Vdc Output

ECOLED-PSU4
PSU - 4 Way (for 2 or 4 lights)
110-240 Volts In - 12Vdc Output

ECOLED-ECBATT
Emergency Battery backup

BEZEL FINISHES
See our Bezel Finishes page

Typical Applications